A The diagram shows the circuit that a student used to investigate how the current through a resistor depends on the potential difference across the resistor.
4 cells
Switch
Ammeter A
Resistor
Voltmeter
0
Each cel provides a potential difference of 1.5 volts.
What is the total potential difference provided by the four cells in the circuit?
Total potential difference =
volts

Asatellite component is in the shape of a cube with 10cm edges, has an evenly distributed mass of 2 kg and one bolt hole at each of four corners. if the maximum predicted random vibration environment is 10 grms, what bolt size would be a good choice for restraint? what other factors might drive bolt size besides force/stress?

(2) (a) you have a simple circuit that consists of only a battery (δvbat=1.5v) and two resistors with resistance r1=10ω and r2=5ω, connected in series with each other. what is the current running through the battery? (b) you re-arrange your circuit so now r2 is attached in parallel to r1 rather than in series. what is the current running through the battery? (c) you add an additional resistor r3=7ω on the same branch as r2. what is the current running through the battery? (d) what is the power dissipated in r3?

By what primary heat transfer mechanism does the sun warm the earth?