​​​​​ B) Two conducting square plates 6.5 cm on a side and separated by 2.3 mm air gap (dielectric constant of air gap is assumed to be 1) is fully charged with a 12.0 V battery. The battery is then disconnected and a dielectric material of dielectric constant 2.3 is inserted.
a) Determine the charge stored in each plate.
b) Determine the capacitance of the plates when dielectric material was inserted.
c) Determine the potential difference between the plates when battery was disconnected and dielectric material was inserted.

heat the gas and measure the pressure

electromagnetic shielding is the practice of reducing the electromagnetic field in a space by blocking the field with barriers made of conductive or magnetic materials. shielding is typically applied to enclosures to isolate electrical devices from their surroundings, and to cables to isolate wires from the environment through which the cable runs. electromagnetic shielding that blocks radio frequency electromagnetic radiation is also known as rf shielding.

the shielding can reduce the coupling of radio waves, electromagnetic fields and electrostatic fields. a conductive enclosure used to block electrostatic fields is also known as a faraday cage. the amount of reduction depends very much upon the material used, its thickness, the size of the shielded volume and the frequency of the fields of interest and the size, shape and orientation of apertures in a shield to an incident electromagnetic

from wikipedia