Noah drops a rock with a density of 1.73 g/cm3 into a pond. will the rock float or sink? explain your answer.

The rock will sink in the water because it has high density than water.

Explanation:

As we know that the density of water is

And in the given question the density of the rock is  .

And also it is known that any object which has higher density than the water it will sink or if it is lower density than water it will float.

Now in the given situation the density of the rock is greater than the density of the water.

Therefore, the rock will sink in the water because of high density than water.

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).