How do the lights in a series circuit behave when one bulb burns out? the rest of the bulbs continue to shine at maximum brightness. the rest of the bulbs continue to shine at a lower brightness. the rest of the bulbs continue to shine at a higher brightness. the rest of the bulbs stop shining and shut off.

Wo audio speakers are placed on a vertical rail. speaker a is placed at head-level while speaker b is place at some variable height, \delta yδy, above speaker a. both speakers receive simultaneous input from a sine-wave generator so the speakers each produce a pure sinusoidal sound wave with a wavelength of 0.531 meters. calculate the lowest height that speaker b can be placed above speaker a to produce a minimum of sound heard by person standing \delta x = 7.86δx=7.86 meters directly in front of speaker a.

As part of an industrial process, air as an ideal gas at 10 bar, 400k expands at steady state through a valve to a pressure of 4 bar. the mass flow rate of air is 0.5 kg/s. the air then passes through a heat exchanger where it is cooled to a temperature of 295k with negligible change in pressure. the valve can be modeled as a throttling process, and kinetic and potential energy effects can be neglected. (a) for a control volume enclosing the valve and heat exchanger and enough of the local surroundings that the heat transfer occurs at the ambient temperature of 295 k, determine the rate of entropy production, in kw/k. (b) if the expansion valve were replaced by an adiabatic turbine operating isentropically, what would be the entropy production? compare the results of parts (a) and (b) and discuss.

Acarpenter builds an exterior house wall with a layer of wood 2.9 cm thick on the outside and a layer of styrofoam insulation 2.3 cm thick on the inside wall surface. the wood has k=0.080w/(m⋅k), and the styrofoam has k= 0.010 w/(m⋅k). the interior surface temperature is 19.0 ∘c , and the exterior surface temperature is -15.0 ∘c . a.)what is the temperature at the plane where the wood meets the styrofoam? celsius b.)what is the rate of heat flow per square meter through this wall? /m^2