subject
Physics, 29.01.2020 17:02 acamiyah

Alarge, semi-truck hauling a full load and a small car are traveling in the same direction. as they approach a sharp curve in the road, which will have a harder time changing direction and why?

semi-truck – it has more inertia
semi-truck – it has balanced forces
small car – it has more inertia
small car – it has balanced forces

ansver
Answers: 3

Another question on Physics

question
Physics, 21.06.2019 18:40
What best describes a sonar wave? transverse and electromagnetic transverse and mechanical longitudinal and electromagnetic longitudinal and mechanical
Answers: 1
question
Physics, 22.06.2019 04:00
Ametal ball with a mass of 0.028 kg is dropped from rest at a height of 1.0 meters above the ground. assuming the energy in the ball is conserved, how much kinetic energy will the ball have when it is 0.5 meters above the ground?
Answers: 1
question
Physics, 22.06.2019 07:30
Some material consisting of a collection of microscopic objects is kept at a high temperature. a photon detector capable of detecting photon energies from infrared through ultraviolet observes photons emitted with energies of 0.3 ev, 0.5 ev, 0.8 ev, 2.0ev, 2.5ev, and 2.8ev. these are the only photon energies observed. (a) draw and label a possible energy-level diagram for one of the microscopic objects, which has four bound states. on the diagram, indicate the transitions corresponding to the emitted photons. explain briefly. (b) would a spring–mass model be a good model for these microscopic objects? why or why not? (c) the material is now cooled down to a very low temperature, and the photon detector stops detecting photon emissions. next, a beam of light with a continuous range of energies from infrared through ultraviolet shines on the material, and the photon detector observes the beam of light after it passes through the material. what photon energies in this beam of light are observed to be significantly reduced in intensity (“dark absorption lines”)? explain briefly.
Answers: 3
question
Physics, 22.06.2019 23:00
Acommon technique in analysis of scientific data is normalization. the purpose of normalizing data is to eliminate irrelevant constants that can obscure the salient features of the data. the goal of this experiment is to test the hypothesis that the flux of light decreases as the square of the distance from the source. in this case, the absolute value of the voltage measured by the photometer is irrelevant; only the relative value conveys useful information. suppose that in part 2.2.2 of the experiment, students obtain a signal value of 162 mv at a distance of 4 cm and a value of 86 mv at a distance of 5.7 cm. normalize the students' data to the value obtained at 4 cm. (divide the signal value by 162.) then calculate the theoretically expected (normalized) value at 5.7 cm.
Answers: 2
You know the right answer?
Alarge, semi-truck hauling a full load and a small car are traveling in the same direction. as they...
Questions
question
Biology, 16.04.2020 20:58
question
Mathematics, 16.04.2020 20:59
question
Mathematics, 16.04.2020 20:59
Questions on the website: 13722363