To switch between activating the fill and activating the stroke, you should press which key?

Suppose that two tanks, 1 and 2, each with a large opening at the top, contain different liquids. a small hole is made in the side of each tank at the same depth 1.57 m below the liquid surface, but the hole in tank 2 has 2.49 times the cross-sectional area of the hole in tank 1. (a) what is the ratio ρ1/ρ2 of the densities of the liquids if the mass flow rate is the same for the two holes? (b) what is the ratio rv1/rv2 of the volume flow rates from the two tanks? (c) at one instant, the liquid in tank 1 is 14.9 cm above the hole. if the tanks are to have equal volume flow rates, what height above the hole must the liquid in tank 2 be just then?

Does heating a metal wire increase or decrease its electrical resistance? why?

Refrigerant-134a flows through a carnot heat pump cycle at 0.5 kg/s. it is known that the maximum absolute temperature in the cycle is 1.1 times the minimum absolute temperature, and the net power input to the cycle is 2.5 kw. if the refrigerant changes from a saturated vapor to a saturated liquid during the heat rejection process, determine the maximum magnitude of the enthalpy of vaporization for this process in kj/kg (with 3 significant figures).