subject
Physics, 31.08.2019 09:30 eweqwoewoji

Agolf ball (m = 46.0 g) is struck with a force that makes an angle of 44.4° with the horizontal. the ball lands 193 m away on a flat fairway. if the golf club and ball are in contact for 6.92 ms, what is the average force of impact? (neglect air resistance.)

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 18:00
Amanometer is used to measure the air pressure in a tank. the fluid used has a specific gravity of 1.25, and the differential height between the two arms of the manometer is 34 in. if the local atmospheric pressure is 12.7 psia, determine the absolute pressure in the tank for the cases of the
Answers: 3
question
Physics, 22.06.2019 00:00
1134567 a jet with mass m = 1.1 ă— 105 kg jet accelerates down the runway for takeoff at 2 m/s2. 1) what is the net horizontal force on the airplane as it accelerates for takeoff? 2.2*10^5 n your submissions: 2.2*10^5 computed value: 220000submitted: saturday, january 26 at 2: 41 pm feedback: correct! 2) what is the net vertical force on the airplane as it accelerates for takeoff? 0 n your submissions: 0 computed value: 0submitted: saturday, january 26 at 2: 41 pm feedback: correct! 3) once off the ground, the plane climbs upward for 20 seconds. during this time, the vertical speed increases from zero to 21 m/s, while the horizontal speed increases from 80 m/s to 95 m/s. what is the net horizontal force on the airplane as it climbs upward? n 4) what is the net vertical force on the airplane as it climbs upward? n 5) after reaching cruising altitude, the plane levels off, keeping the horizontal speed constant, but smoothly reducing the vertical speed to zero, in 13 seconds. what is the net horizontal force on the airplane as it levels off? n 6) what is the net vertical force on the airplane as it levels off?
Answers: 1
question
Physics, 22.06.2019 06:00
An object moves from position +34m to the position -15m in 15 seconds. what is the total displacement? what is the total velocity?
Answers: 3
question
Physics, 22.06.2019 07:30
Some material consisting of a collection of microscopic objects is kept at a high temperature. a photon detector capable of detecting photon energies from infrared through ultraviolet observes photons emitted with energies of 0.3 ev, 0.5 ev, 0.8 ev, 2.0ev, 2.5ev, and 2.8ev. these are the only photon energies observed. (a) draw and label a possible energy-level diagram for one of the microscopic objects, which has four bound states. on the diagram, indicate the transitions corresponding to the emitted photons. explain briefly. (b) would a spring–mass model be a good model for these microscopic objects? why or why not? (c) the material is now cooled down to a very low temperature, and the photon detector stops detecting photon emissions. next, a beam of light with a continuous range of energies from infrared through ultraviolet shines on the material, and the photon detector observes the beam of light after it passes through the material. what photon energies in this beam of light are observed to be significantly reduced in intensity (“dark absorption lines”)? explain briefly.
Answers: 3
You know the right answer?
Agolf ball (m = 46.0 g) is struck with a force that makes an angle of 44.4° with the horizontal. the...
Questions
Questions on the website: 13722359