Physics, 26.12.2019 05:31 meowmeowcow

You are discussing a material that readily accepts the flow of electrons. this is a description of a(n)

a) conductor
b)insulator
c)semi-insulator
d)semi-conductor

Answers: 2

Show answers

Answers

Answer from: SignoraPenguino

Conductor, a conductive materail readily accepts the flow of electrons.

Answer from: Quest

russian is not my first language, so i'm afraid i can't write out an answer in russian, but hopefully you can find a way to do so. here's my best translation of the problem: you're given a plot of a particle's position in one-dimensional space over time, and you're asked to find either the total distance traveled by the particle after 6 seconds had elapsed, or the total displacement of the particle after 6 seconds.

if you want the total distance traveled, you would first need to determine the particle's velocity as a function of time, then integrate that over the 6-second interval. we know the position function is quadratic with roots at 0 and 6, so we have

$x(t)=ax(x-6)$

where $a$ is unknown. because the position is parabolic, there is symmetry about the midpoint at $t=3$ , and we know that

$x(3)=10\implies -9a=10\implies a=-\dfrac{10}9$

so that the position function is

$x(t)=-\dfrac{10}9x(x-6)$

which means the velocity is

$v(t)=\dfrac{\mathrm dx}{\mathrm dt}=-\dfrac{20}9x+\dfrac{60}9$

then the total distance traveled is

$\displaystyle\int_{t=0}^{t=6}|v(t)|\,\mathrm dt=\left\{\int_{t-0}^{t=3}-\int_{t=3}^{t=6}\right\}v(t)\,\mathrm dt=20$

so the total distance traveled is 20 m.

on the other hand, if you want to find displacement: the particle starts at $x=0$ and ends at $x=0$ , so its displacement is 0.

Answer from: Quest

force is based upon mass and acceleration.the statement is not always true.

it can be explained from newton's second law of motion.

as per newton's second law of motion the rate of change of momentum is directly proportional to the applied force and takes place along the direction of force.

mathematically it can be written as -

$f\alpha \frac{dp}{dt}$

⇒ $f= k \frac{dp}{dt}$

here k is the proportionality constant whose value is 1.

$f=\frac{dp}{dt}$

$f= \frac{d[mv]}{dt}$

$f= m\frac{dv}{dt} +v\frac{dm}{dt}$

$f=ma+v\frac{dm}{dt}$ [a is the acceleration=dv/dt]

hence we see that force not only depends on mass and acceleration but also on velocity and rate of change of mass. force f will depend on mass and acceleration only when mass is constant.

hence the statement that force is based upon mass and acceleration is false.

Another question on Physics

Physics, 22.06.2019 15:00

Astudent throws a water balloon with speed v0 from a height h = 1.76 m at an angle θ = 21° above the horizontal toward a target on the ground. the target is located a horizontal distance d = 9.5 m from the student’s feet. assume that the balloon moves without air resistance. use a cartesian coordinate system with the origin at the balloon's initial position. (a) what is the position vector, rtarge t, that originates from the balloon's original position and terminates at the target? put this in terms of h and d, and represent it as a vector using i and j. (b) in terms of the variables in the problem, determine the time, t, after the launch it takes the balloon to reach the target. your answer should not include h. (c) create an expression for the balloon's vertical position as a function of time, y(t), in terms of t, vo, g, and θ. (d) determine the magnitude of the balloon's initial velocity, v0, in meters per second, by eliminating t from the previous two expressions.

Answers: 3

Answer

Physics, 22.06.2019 23:00

Acommon technique in analysis of scientific data is normalization. the purpose of normalizing data is to eliminate irrelevant constants that can obscure the salient features of the data. the goal of this experiment is to test the hypothesis that the flux of light decreases as the square of the distance from the source. in this case, the absolute value of the voltage measured by the photometer is irrelevant; only the relative value conveys useful information. suppose that in part 2.2.2 of the experiment, students obtain a signal value of 162 mv at a distance of 4 cm and a value of 86 mv at a distance of 5.7 cm. normalize the students' data to the value obtained at 4 cm. (divide the signal value by 162.) then calculate the theoretically expected (normalized) value at 5.7 cm.

Answers: 2

Answer

Physics, 23.06.2019 00:00

Abus travels 280km south along a straight path with an average velocity of 88km/h to the south. the bus stops for 24 min, then it travels 210 km south with an average velocity of 75 km/h to the south. how long does the total trip last?

Answers: 1

Answer

Physics, 23.06.2019 04:31

Which of the following is tru about semi-conductors

Answers: 2

Answer

You know the right answer?

You are discussing a material that readily accepts the flow of electrons. this is a description of a...

Questions