A car comes to a stop six seconds after the driver applies the brakes. While the brakes are on, the following velocities are recorded: Time since brakes applied (sec) 0 2 4 6
Velocity (ft/s) 87 44 16 0
Give lower and upper estimates (using all of the available data) for the distance the car traveled after the brakes were applied.

Which type of circuit is becoming more common in residential electrical design and construction? a. hazardous-area circuit b. three-phase circuit c. 480-volt circuit d. communication circuit

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.

Connie has $660,000 she wants to save. if the fdic insurance limit per depositor, per bank, is $250,000, which of these way is distributing her money between three banks will guarantee that all of her money is insured ?