Physics, 12.05.2021 01:20 nisha87

In which mode of heat transfer is the convection heat transfer coefficient usually higher, natural convection or forced convection?why?

Answers: 3

Show answers

Another question on Physics

Physics, 21.06.2019 18:00

Aplane flies directly between two cities, a and b, which are separated by . from a to b, the plane flies into a headwind. on the return trip from b to a, the wind velocity is unchanged. the trip from b to a takes less than the trip from a to b. what is the airspeed of the plane, assuming it is the same in both directions

Answers: 1

Answer

Physics, 21.06.2019 19:40

Wo audio speakers are placed on a vertical rail. speaker a is placed at head-level while speaker b is place at some variable height, \delta yδy, above speaker a. both speakers receive simultaneous input from a sine-wave generator so the speakers each produce a pure sinusoidal sound wave with a wavelength of 0.531 meters. calculate the lowest height that speaker b can be placed above speaker a to produce a minimum of sound heard by person standing \delta x = 7.86δx=7.86 meters directly in front of speaker a.

Answers: 2

Answer

Physics, 22.06.2019 06:20

Oxygen undergoes an isentropic expansion from 120 degree c and 280 kpa absolute to 140 kpa absolute. determine the final temperature of the oxygen and the amount of work per kg of o_2 produced in the process if it is adiabatic.

Answers: 1

Answer

Physics, 22.06.2019 07:10

1. how much energy is needed to raise the temperature of 40.0 g of argon from 25c to 40c? the specific heat capacity of argon is 0.520 j/(g·k) 2a. 23.0 ml of 0.100 m hcl (standard) are added from a buret to neutralize 50.0 ml of an unknown basic solution. 2b. if the oh- produced in the previous reaction came from ca(oh)2, then what is the molarity of the ca(oh)2? 3.calculate the new freezing-point of a solution when 60.5 grams of cacl2 solute is dissolved in 0.612 kg of water. 4. what is the maximum number of moles of alcl3 that can be produced from 5.0 mol al and 6.0 mol cl2? 5. a sample of oxygen gas has a volume of 150 ml when its pressure is 0.923 atm. if the pressure is increased to 0.987 atm and the temperature remains constant, what will the new volume be? 6. nitrogen gas in a closed container at a temperature of 100.0 oc and 3.0 atm is heated to 300 oc. what is the pressure of the gas at the higher temperature?

Answers: 3

Answer

You know the right answer?

In which mode of heat transfer is the convection heat transfer coefficient usually higher, natural c...

Questions