Physics, 14.05.2021 07:10 whocares1234
What do we still need to know in order to determine why the two rock formations have such similar minerals? Choose all that apply.(Hint 2 answers are right)
1) We need to know which rock formation formed first.
2) We need to know which rock formation formed together.
3) We need to know how minerals from one rock became part of the other rock.
4) We need to know how minerals from one rock are not at all the same as the other rock.
Answers: 1
Physics, 22.06.2019 23:00
A6.0-μf air-filled capacitor is connected across a 100-v voltage source. after the source fully charges the capacitor, the capacitor is immersed in transformer oil (of dielectric constant 4.5). how much additional charge flows from the voltage source, which remained connected during the process?
Answers: 1
Physics, 23.06.2019 08:30
Atension test was conducted on a specimen of aisi 1020 hot-rolled steel having an initialdiameter of 9.11 mm. representative test data are given in table1in the form of force and engineering strain. for strain the extensometer gage length was li= 50.8 mm. in addition, minimumdiameters were measuredmanually with a micrometer in the necked region at several points during the test. after fracture, thebroken halves were reassembled, and the following measurements were made: (1) marks originally 25.4 mm apart and on opposite sides of the necked regionwere 38.6 mm apart due to the lengthwise stretching in the specimen; (2) similar marks originally 50.8 mm apart were 70.9 mmapart; (3) the final minimum diameter in the necked region was 5.28 mma) determine the following material properties: elastic modulus, 0.2% offset yield strength, ultimate tensile strength, percent elongation, and percent reduction in area. b) assume that the test was interrupted upon reaching a strain u = 0.007, and the specimen unloaded to zero force. estimate the elastic strain recovered and the plastic strain remaining. also, what would the new length of the original 50.8 mm gage section. hint: might save time/effort to use excel, mathcad, matlab, etc. to solve part a)table1 data and analysis for a tension test on aisi 1020 hot-rolled steeltest dataforce (p, kn)1. 0.002. 6.673. 13.344. 19.135. 17.796. 17.217. 17.538. 17.449. 17.2110. 20.7711. 24.2512. 25.7113. 25.7514. 25.0415. 23.4916. 21.3517. 18.9018. 17.39engr. strain (ε)1. 02. 0.00053. 0.00104. 0.00155. 0.00236. 0.00317. 0.00508. 0.00709. 0.010010. 0.049011. 0.125012. 0.218013. 0.234014. 0.306015. 0.330016. 0.348017. 0.360018. 03660diameter (d, mm)1. 9.112. 9.113. 9.114. 9.115. 9.116. 9.117. 9.118. 9.119. 9.1110. 8.8911. 8.8912. 8.2613. 8.2614. 7.6215. 6.9916. 6.3517. 5.7218. 5.28
Answers: 2
Physics, 23.06.2019 15:10
A60-kg box is being pushed a distance of 6.8 m across the floor by a force p with arrow whose magnitude is 162 n. the force p with arrow is parallel to the displacement of the box. the coefficient of kinetic friction is 0.24. determine the work done on the box by each of the four forces that act on the box. be sure to include the proper plus or minus sign for the work done by each force. (the floor is level and horizontal. forces that act on the box: pushing force p, frictional force f, normal force n, and weight mg.)
Answers: 2
Physics, 23.06.2019 18:30
Describes how input voltage signals received by a computer are handled through a series of electronic logic circuits maintained in its programmed instructions. these instructions are used to change the input voltage signals, or data, into output voltage signals, or commands.
Answers: 1
What do we still need to know in order to determine why the two rock formations have such similar mi...
Mathematics, 17.10.2020 20:01
Computers and Technology, 17.10.2020 20:01
Biology, 17.10.2020 20:01
Mathematics, 17.10.2020 20:01
Mathematics, 17.10.2020 20:01
Mathematics, 17.10.2020 20:01
Mathematics, 17.10.2020 20:01