Physics, 19.05.2021 18:10 Backfire3607

An object of mass m is attached to a vertically oriented spring. The object is pulled a short distance below its equilibrium position and released from rest. Set the origin of the coordinate system at the equilibrium position of the object and choose upward as the positive direction. Assume air resistance is so small that it can be ignored. a. Beginning the instant the object is released, select the graph that best matches the position vs. time graph for the object.
b. Beginning the instant the object is released, select the graph that best matches the velocity vs. time graph for the object.
c. Beginning the instant the object is released, select the graph that best matches the acceleration vs. time graph for the object.

Answers: 3

Show answers

Another question on Physics

Physics, 21.06.2019 22:30

The force will determine the acceleration.

Answers: 1

Answer

Physics, 22.06.2019 03:30

As part of an industrial process, air as an ideal gas at 10 bar, 400k expands at steady state through a valve to a pressure of 4 bar. the mass flow rate of air is 0.5 kg/s. the air then passes through a heat exchanger where it is cooled to a temperature of 295k with negligible change in pressure. the valve can be modeled as a throttling process, and kinetic and potential energy effects can be neglected. (a) for a control volume enclosing the valve and heat exchanger and enough of the local surroundings that the heat transfer occurs at the ambient temperature of 295 k, determine the rate of entropy production, in kw/k. (b) if the expansion valve were replaced by an adiabatic turbine operating isentropically, what would be the entropy production? compare the results of parts (a) and (b) and discuss.

Answers: 3

Answer

Physics, 22.06.2019 16:30

What happens when you slowly pulled the carboard?

Answers: 2

Answer

Physics, 22.06.2019 20:30

The great sandini is a 60.0-kg circus performer who is shot from a cannon (actually a spring gun). you don’t find many men of his caliber, so you him design a new gun. this new gun has a very large spring with a very small mass and a force constant of 1100 n/m that he will compress with a force of 4400 n. the inside of the gun barrel is coated with teflon, so the average friction force will be only 40.0 n during the 4.00 m he moves in the barrel. at what speed will he emerge from the end of the barrel, 2.50 m above his initial rest position?

Answers: 2

Answer

You know the right answer?

An object of mass m is attached to a vertically oriented spring. The object is pulled a short distan...

Questions