Bob the block is placed next to the cylindrical glass wall of an amusement park, the cylinder then begins spinning at constant angular speed and the bob remains stuck the wall even the floor drops away , the free body diagram of all the forces acting on the bob like?

Apositive point charge q is fixed on a very large horizontal frictionless tabletop. a second positive point charge q is released from rest near the stationary charge and is free to move. which statement best describes the motion of q after it is released? assume q stays on the table

Use the profile illustrated for problem (1). assume that the layer of silty sand fill (sm) is placed over the entire site. estimate the thickness of the fill (h - in feet) that will cause the effective vertical stress at the center of the clay layer to increase by 517.5 pounds per square foot.

Antireflective coatings on solar cells are often made by applying a thin film of silicon nitride (sinx), which has an index of refractive of 1.2, on the top of the silicon solar cell, which has a refractive index of about 3.5. however, the sun emits radiation of various wavelengths which the solar cell absorbs, and the antireflective coating can only absolutely minimize the reflection of one of these wavelengths. the coating thickness is chosen to reduce the reflection of green/yellow light (e = 2.2 ev), which is the most intense color in the solar spectrum (shown below). which of the following coatings would minimize reflection of green/yellow light? the answer is 820 nm how? what is the angular width of the central maximum of an electron traveling at 2 x 108 m/s going through a single slit of width 1 mm.