Physics, 10.06.2021 21:40 andrwisawesome0

How do furnace heating systems typically work? Ignition of fuel creates a pressure change inside the furnace, causing a piston to exhaust hot air into the building.
A bimetallic strip absorbs thermal energy from the air outside of the building, causing the transfer of thermal energy from fuel to the air inside the building.
Energy in the fuel’s chemical bonds is converted to thermal energy, which is then transferred to the air inside the building.
Thermal energy from outside of the building is transferred to the inside of the building using a liquid.

Answers: 3

Show answers

Another question on Physics

Physics, 22.06.2019 13:00

Which of the following correctly describes what happens when an atomic bomb explodes? small pieces of fissionable material are joined and form a body with a mass greater than the critical mass, the relative number of neutrons escaping decreases, and a chain reaction and explosion result. large pieces of fissionable matter are brought together quickly and form a body with a mass smaller than the critical mass, the relative number of escaping neutrons increases, and a chain reaction and explosion result.

Answers: 2

Answer

Physics, 22.06.2019 14:10

Amachinist turns the power on to a grinding wheel, at rest, at time t = 0 s. the wheel accelerates uniformly for 10 s and reaches the operating angular velocity of 96 rad/s. the wheel is run at that angular velocity for 40 s and then power is shut off. the wheel slows down uniformly at 1.5 rad/s2 until the wheel stops. in this situation, the time interval of deceleration is closest to:

Answers: 3

Answer

Physics, 22.06.2019 19:50

The heater element of a 120 v toaster is a 5.4 m length of nichrome wire, whose diameter is 0.48 mm. the resistivity of nichrome at the operating temperature of the toaster is 1.3 × 10-6 ω·m. the toaster is operated at a voltage of 120 v. (a) what is the power drawn by the toaster? (b) if the cost of electricity is 12 ¢ per kilowatt-hour, and it takes 2 minutes to toast bread, how much does it cost for toasted bread? (c) when the heater element is at room temperature, is the resistivity in the nichrome wire greater than, less than, or equal to it’s resistivity when at operating temperature? explain.

Answers: 3

Answer

Physics, 22.06.2019 23:20

Consider each of the electric- and magnetic-field orientations given next. in each case, what is the direction of propagation of the wave? a)\vec ein the +xdirection,\vec bin the +ydirection. choose+ x direction- x direction+ y direction- y direction+ z direction- z direction b)\vec ein the -y direction,\vec bin the +x choose+ x direction- x direction+ y direction- y direction+ z direction- z direction c)\vec ein the +z direction,\vec bin the -x direction. choose+ x direction- x direction+ y direction- y direction+ z direction- z direction d)\vec ein the +y direction,\vec bin the -z direction. choose+ x direction- x direction+ y direction- y direction+ z direction- z direction

Answers: 3

Answer

You know the right answer?

How do furnace heating systems typically work? Ignition of fuel creates a pressure change inside th...

Questions