A frictionless piston-cylinder device contains 10 kg of superheated vapor at 550 kPa and 340oC. Steam is then cooled at constant pressure until 60 percent of it, by mass, condenses. Determine (a) the work (W) done during the process. (b) What-if Scenario: What would the work done be if steam were cooled at constant pressure until 80 percent of it, by mass, condenses

a) the work (W) done during the process is -2043.25 kJ

b) the work (W) done during the process is -2418.96 kJ

Explanation:

Given the data in the question;

mass of water vapor m = 10 kg

initial pressure P₁ = 550 kPa

Initial temperature T₁ = 340 °C

steam cooled at constant pressure until 60 percent of it, by mass, condenses; x = 100% - 60% = 40% = 0.4

from superheated steam table

specific volume v₁ = 0.5092 m³/kg

so the properties of steam at p₂ = 550 kPa, and dryness fraction

x = 0.4

specific volume v₂ = v + xv

v₂ = 0.001097 + 0.4( 0.34261 - 0.001097 )

v₂ = 0.1377 m³/kg

Now, work done during the process;

W = mP₁( v₂ - v₁ )

W = 10 × 550( 0.1377 - 0.5092 )

W = 5500 × -0.3715

W = -2043.25 kJ

Therefore, the work (W) done during the process is -2043.25 kJ

( The negative, indicates work is done on the system )

b)

What would the work done be if steam were cooled at constant pressure until 80 percent of it, by mass, condenses

x₂ = 100% - 80% = 20% = 0.2

specific volume v₂ = v + x₂v

v₂ = 0.001097 + 0.2( 0.34261 - 0.001097 )

v₂ = 0.06939 m³/kg

Now, work done during the process will be;

W = mP₁( v₂ - v₁ )

W = 10 × 550( 0.06939 - 0.5092 )

W = 5500 × -0.43981

W = -2418.96 kJ

Therefore, the work (W) done during the process is -2418.96 kJ

find the surface area of the sphere to the nearest square unit. use a calculator.

a. 254 in.2

b. 64 in.2

c. 127 in.2

d. 1,018 in.2