The electric motor in the car is powered by a battery. To charge the battery, the car is plugged into the mains supply at 230 V The power used to charge the battery is 6.9 kW

Calculate the current used to charge the battery.

[Worth 4 marks]

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

What is the electric force acting between two charges of -0.0045 c and -0.0025 c that are 0.0060 m apart? use fe=kq1q2/r^2 and k = 9.00 x 10^9 n*m^2/c^2 a. 1.7 x 10^7 n b. -1.7 x 10^7 n c. -2.8 x 10^9 n d. 2.8 x 10^9 n

Matter is needed to transfer thermal energy bya. conductionb. convectionc. radiation d. both a & b.