Physics, 12.07.2021 04:30 thatcurlysophia

ENERGY BAR GRAPHS 1. Go to the following site: https://phet. colorado. edu/en/simulation/energy-skate-park
2. Click play to start the simulation
3. Click INTRO to begin
4. Leave all settings on the right side as is, but you are welcome to choose a skater.
5. In the top left corner, there is a green plus sign. Click that so that the Energy Bar
Graphs drop down for you to observe.
6. Click on the skater and drag them to various locations on the ramp to observe the
energy bar graph above. You can always pause the skater at a given location by clicking
the pause button on the bottom.
7. Complete the table below for each location you place the skater and the
energy/energies associated with that location.

Answers: 3

Show answers

Answers

Answer from: Quest

Acetic acid /əˈsiːtɪk/, systematically named ethanoic acid /ˌɛθəˈnoʊɪk/, is a colourless liquid organic compound with the chemical formula ch3cooh (also written as ch3co2h or c2h4o2). when undiluted, it is sometimes called glacial acetic acid. vinegar is no less than 4% acetic acid by volume, making acetic acid the main component of vinegar apart from water. acetic acid has a distinctive sour taste and pungent smell. in addition to household vinegar, it is mainly produced as a precursor to polyvinyl acetate and cellulose acetate. it is classified as a weak acid since it only partially dissociates in solution, but concentrated acetic acid is corrosive and can attack the skin.acetic acidnamespreferred iupac nameacetic acidsystematic iupac nameethanoic acidother namesvinegar (when dilute); hydrogen acetate; methanecarboxylic acid[1][2]identifierscas number64-19-7 3d model (jsmol)interactive image3dmetb00009 reference506007chebichebi: 15366 chemblchembl539 chemspider171 drugbankdb03166 echa infocard100.000.528ec number200-580-7e numbere260 (preservatives)gmelin reference1380iuphar/bps1058keggd00010 meshacetic+acidpubchem cid176rtecs numberaf1225000uniiq40q9n063p un number2789inchiinchi=1s/c2h4o2/c1-2(3)4/h1h3,(h,3,4) key: qtbsbxvteameqo-uhfffaoysa-n smilescc(o)=o

Answer from: Quest

The answer is b hope this

Answer from: Quest

Iwas going to ask that quesytion sorry dude i dont know : ( : /

Answer from: Quest

electromagnetic shielding is the practice of reducing the electromagnetic field in a space by blocking the field with barriers made of conductive or magnetic materials. shielding is typically applied to enclosures to isolate electrical devices from their surroundings, and to cables to isolate wires from the environment through which the cable runs. electromagnetic shielding that blocks radio frequency electromagnetic radiation is also known as rf shielding.

the shielding can reduce the coupling of radio waves, electromagnetic fields and electrostatic fields. a conductive enclosure used to block electrostatic fields is also known as a faraday cage. the amount of reduction depends very much upon the material used, its thickness, the size of the shielded volume and the frequency of the fields of interest and the size, shape and orientation of apertures in a shield to an incident electromagnetic

from wikipedia

Another question on Physics

Physics, 22.06.2019 10:00

How are the crust and the inner core alike? a) they are both solid. b) they both have the same temperature. c) they are both under the same pressure. d) they are both very close to the center of the earth.

Answers: 1

Answer

Physics, 22.06.2019 15:30

What is the increase in density of a medium due to wave travel?

Answers: 2

Answer

Physics, 22.06.2019 21:40

Ahair dryer is basically a duct in which a few layers of electric resistors are placed. a small fan pulls the air in and forces it through the resistors where it is heated. air enters a 1200 w hair dryer at 100 kpa and 22°c and leaves at 47°c. the cross-sectional area of the hair dryer at the exit is 60 cm2. neglecting the power consumed by the fan and the heat losses through the walls of the hair dryer, determine (a) the volume flow rate of air at the inlet and (b) the velocity of the air at the exit.

Answers: 1

Answer

Physics, 22.06.2019 22:00

Ultraviolet radiation is dangerous because it has a high enough energy to damage skin cells. what is the best explanation of the relationship between wavelength and wave energy? a) wave energy is related only to frequency, not wavelength. b) longer wavelengths have lower frequencies but higher energy. c) the shorter the wavelength, the lower the frequency and the higher the energy. d) the shorter the wavelength, the higher the frequency and the higher the energy.

Answers: 3

Answer

You know the right answer?

ENERGY BAR GRAPHS 1. Go to the following site: https://phet. colorado. edu/en/simulation/energy-ska...

Questions