A wire, 1.0 m long, with a mass of 90 g, is under tension. A transverse wave is propagated on the wire, for which the frequency is 890 Hz, the wavelength is .10m, and the amplitude is 6.5 mm. The tension in the line, in SI units, is closest to

T = 712.9 N

Explanation:

First, we will find the speed of the wave:

v = fλ

where,

v = speed of the wave = ?

f = frequency = 890 Hz

λ = wavelength = 0.1 m

Therefore,

v = (890 Hz)(0.1 m)

v = 89 m/s

Now, we will find the linear mass density of the wire:

where,

μ = linear mass density of wie = ?

m = mass of wire = 90 g = 0.09 kg

L = length of wire = 1 m

Therefore,

μ = 0.09 kg/m

Now, the tension in wire (T) will be:

T = μv² = (0.09 kg/m)(89 m/s)²

T = 712.9 N

pythagoras' theorem

square root (-5^2+9^2)

square root (25+81)

square root (106)

angle is tan^-1(9/5)

neg x, pos y

the design of a ski jumping suit involves a trade-off between giving the skiers lift to get higher jumps and ensuring the skier does not face a lot of drag before the jump itself. an expansive suit may to lift the skier higher, but at the same time, it will also increase the air resistance. higher air resistance as the skier goes down the slope limits the speed of the jump. a big suit also increases the risk of losing balance or control, especially if there's a strong gust of wind. while technologically enhanced suits a lot, clothing is not the only factor in a ski jumper’s success. gathering speed while skiing down the slope, ensuring good speed on the ramp, and maintaining good body posture and form in the air all contribute to a ski jumper's success.