Please Answer Fast! (15 pts) (Thanks in Advance) When using the "ball and stick" drawing method of drawing a compound, which element usually goes in the center of the model?

Asteam power plant operates on an ideal reheat rankine cycle between the pressure limits of 15 mpa and 10 kpa. the mass flow rate of steam through the cycle is 12 kg/s. steam enters both stages of the turbine at 500°c. if the moisture content of the steam at the exit of the low-pressure turbine is not to exceed 10 percent, determine (a) the pressure at which reheating takes place, (b) the total rate of heat input in the boiler, and (c) the thermal efficiency of the cycle. also, show the cycle on a t-s diagram with respect to the saturation lines. (2.15 mpa; 45.0 mw; 42.6%)

What is a carrier wave and how does it affect what you hear on the radio

Where do magnetic lines of force enter earth?