Thank you so much hhh

Calculate the first and second velocities of the car with four washers attached to the pulley, using the formulas v1 = 0.25 m / t1 , and v2 = 0.25 m / (t2 – t1) where t1 and t2 are the average times the car took to reach the 0.25 and the 0.50 meter marks. record these velocities, to two decimal places, in table e.

An air standard cycle with variable specific heats is executed in a closed system and is composed of the following four processes. 1-2 isentropic compression 100 kpa and 22°c to 600 kpa 2-3 v=constant heat addition to 1500 k 3-4 isentropic expansion to 100 kpa 4-1 p=constant heat rejection to initial state (a) show the cycle on p-v and t-s s (b) calculate the net work output per unit mass (409 kj/kg) (c) determine the thermal efficiency (47.9%)

1. study the scenario. the particles in some system are moving around quickly. a few minutes later, the particles are moving, on average, more slowly. how does this change in motion affect the temperature of the system? the temperature of the system did not change. the speed of the particles does not affect temperature, the number of particles affects the temperature.the temperature of the system is lower now than it was initially. faster moving particles result in a higher temperature for the system.the temperature of the system is higher now than it was initially. slower moving particles result in a higher temperature for the system.the temperature of the system did not change. the speed of the particles has no effect on the temperature, only the type of atom affects the temperature.