What evidence is there that work is being done? a) A lever is being used.
b) A simple machine makes a task easier.
c) The rock has a larger force than the boy.
d) The boy uses force to move the rock a distance.

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

If a refrigerator is a heat pump that follows the first law of thermodynamics, how much heat was removed from food inside of the refrigerator if it released 380j of energy to the room?

Give your knowledge of these things in your paper, you will compare and contrast analog and digital signals to determine which is more reliable for encoding and transmitting information. you’ll compare these features: signal shape numerical values for signal measurements amount of data that can be transmitted energy requirements privacy and security (ability of the signal to be encoded in a secret code) clarity of signal in the space provided, write down what you already know about any of these features. if you’re not sure, write down questions you might have about the features.