Pls help me with this question

Ok i am attempting to my niece attach a galvanized wire (like a tether for a dog) at the corner of two fences, making a tightwire if you will and we drilled a hole in a softball and she hits it. the ? and problem is that we can not get the wire taunt enough where it doesnt sag after hitting the ball once, and the wire sags and wobbbles. its a 15 ft rubber covered galvanized wire and one can adjust the length of the placing of the wire by having it make the corner of 2 fences become a it can be adjusted, however, with all our human strength and pliers we could not make it taunt as possible. is there anything other that attaching it to a car to do this. sorry abt the length but it would mean the world to my niece if i could solve this came up with the entire idea herself, and she is 14 and paid for the wire and did as much work as i did drilling a hole through a softball wide enough for attaching piece at each end of the wire that clips on to the fence. . any ideas welcome if serious. but awesome if it is a fact. much obliged. bucky bukowski buckman

Identical marbles are released from the same height on each of the following four frictionless ramps . compare the speed of the marbles at the end of each ramp. explain your reasoning

Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.