Physics, 30.12.2021 14:10 zoestickle
How to find tension and acceleration in a 3 blcok pulley system with friction
Answers: 1
Physics, 21.06.2019 19:30
The 20@kg wheel has a radius of gyration about its center g of kg = 300 mm. when it is subjected to a couple moment of m = 50 n # m, it rolls without slipping. determine the angular velocity of the wheel after its mass center g has traveled through a distance of sg = 20 m, starting from rest.
Answers: 3
Physics, 21.06.2019 22:00
Air is held within a frictionless piston-cylinder container, which is oriented vertically. the mass of the piston is 0.45 kg and the cross-sectional area is 0.0030 m2. initially (state 1) the pressure of the gas is sufficient to support the weight of the piston as well as the force exerted by the atmospheric pressure ( 101.32 kpa). the volume occupied by the air within the cylinder in state 1 is 1.00 liter. one end of a spring (with spring constant k = 1000 n/m) is attached to the top of the piston, while the other end of the spring is attached to a stage that can move vertically. initially the spring is undeflected and therefore exerts no force. then the stage is then moved quasistatically downward a distance of 10.0 cm, at which point the system reaches state 2. the piston-cylinder is not insulated; rather it remains in diathermal contact with the surroundings, which are at a constant temperature of 300 k. what is the change of pressure within the container?
Answers: 3
Physics, 22.06.2019 10:10
Henry, whose mass is 95 kg, stands on a bathroom scale in an elevator. the scale reads 830 n for the first 2.4 s after the elevator starts moving, then 930 n for the next 2.4 s. part a what is the elevator's speed 4.8 s after starting? express your answer with the appropriate units.
Answers: 2
Physics, 22.06.2019 10:50
Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.
Answers: 3
How to find tension and acceleration in a 3 blcok pulley system with friction...
Mathematics, 04.03.2021 09:00
Chemistry, 04.03.2021 09:00
History, 04.03.2021 09:00
Chemistry, 04.03.2021 09:00
English, 04.03.2021 09:00
Chemistry, 04.03.2021 09:00
Physics, 04.03.2021 09:00
Mathematics, 04.03.2021 09:00
Mathematics, 04.03.2021 09:00
Mathematics, 04.03.2021 09:00
Mathematics, 04.03.2021 09:00
Arts, 04.03.2021 09:00
History, 04.03.2021 09:00