In the second law experiment, the acceleration is calculated by measuring the time for the cart to move from the start point to the end point and applying the kinematics equation: s= 1/2 at^2 explain how this equation is used to find the acceleration.

When a resistor with resistance r is connected to a 1.50-v flashlight battery, the resistor consumes 0.0625 w of electrical power. (throughout, assume that each battery has negligible internal resistance.) what power does the resistor consume if it is connected to a 12.6-v car battery? assume that r remains constant when the power consumption changes.

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.

Astudent pushes on a 20.0 kg box with a force of 50 n at an angle of 30° below the horizontal. the box accelerates at a rate of 0.5 m/s2 across a horizontal floor. what is the value of the normal force on the box? 200 n 243 n 156 n 225 n