What molecular geometry would be expected for f2 and hf?

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Juan created a chart to him study for a test. which headings best complete the chart? x: transparent objects y: opaque objects x: opaque objects y: transparent objects x: high frequency waves y: low frequency waves x: low frequency waves y: high frequency waves

Apebble is thrown into a calm lake, ripples are formed from the center and move outward. the water particles in the lake travel in a circular pattern that moves up and down on the surface of a lake, and the energy travels a) diagonally. b) downward. c) horizontally. d) upward.