Physics, 28.07.2019 09:10 stevenabdullatif16

If the spring of a jack in the box is compressed a distance of 8.00 cm from its relax

Answers: 1

Show answers

Another question on Physics

Physics, 22.06.2019 05:10

Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.

Answers: 3

Answer

Physics, 22.06.2019 15:10

In the circuit, the switch s has been open for a long time and r = 125 kohm. it is then suddenly closed. (a) determine the time constant before the switch is closed. s (b) determine the time constant after the switch is closed. _ s (c) let the switch be closed at t = 0. find the current in the switch as a function of time. (use t for time. express your answer in milliamps and seconds.) i(t) =_

Answers: 3

Answer

Physics, 22.06.2019 19:30

Select light for the type of wave, adjust the wavelength so that the light is red, and increase the amplitude of the light to the max. then, select the start button at the source location to begin producing the waves. light is a form of electromagnetic wave, containing oscillating electric and magnetic fields. the wave amplitude detector mentioned above shows how the electric field oscillates in time at the location of the probe. the amplitude of the wave at the location of the probe is equal to the maximum electric field measured. how does the amplitude of the wave depend on the distance from the source?

Answers: 2

Answer

Physics, 23.06.2019 00:00

You are a researcher for a golf club manufacturer. you are given two identical looking cubes of a metal alloy. you are informed that they are made of the exact same material, but one is crystalline, whereas the other is amorphous. it is your job to determine which one is amorphous this one is more stress-resistant and is useful in reinforcing golf clubs. which of the following is the best way to determine which is which? a. determine the density of each cube. the more dense one is the amorphous solid. b. melt both cubes and look for a broader range of melting temperatures. the one that melts over a broader range of temperatures is the amorphous solid. c. determine the density of each cube. the less dense cube is the amorphous solid. d. melt both cubes and measure the range of melting temperatures. the one that melts over a narrower range of temperatures is the amorphous solid.

Answers: 1

Answer

You know the right answer?

If the spring of a jack in the box is compressed a distance of 8.00 cm from its relax...

Questions