The collodion process used wet plates, which were glass plates that had been covered with a mixture of chemicals before being placed in the camera for the exposure.

Two identical 82 mg dust particles very far apart (pee 0) are moving directly toward each other at a speed of 3698 m/s. the charge on each is-719 ? c. determine how close they will get to each other. let k = 9x109 n-m2/c2 & ignore gravity.

Note: the following questions are unrelated to the balmer series or the martian. refer to your course notes. a sun-sized star will spend most of its lifetime as a: white dwarf b. red giant c. protostar d. main-sequence star

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)