Physics, 22.07.2019 02:30 alexussaniyah

In an electric toaster, electricity passes through thin metal wires (called filaments) inside the toaster, causing the wires to glow and heat up. the heat given off by the filaments then toasts the bread. if 500 kilojoules of electricity are supplied to a toaster, which choice below could represent the total amount of heat energy given off by the filaments of the toaster? a. 505 kilojoules b. 630 kilojoules c. 520 kilojoules d. 480 kilojoules

Answers: 1

Show answers

Another question on Physics

Physics, 22.06.2019 05:50

Acylinder with a movable piston contains 11.7 moles of a monatomic ideal gas at a pressure of 1.32×10^5 pa. the gas is initially at a temperature of 300 k. an electric heater adds 43200 j of energy into the gas while the piston moves in such a way that the pressure remains constant. cp=20.79 j k^−1 mol^−1 for a monatomic ideal gas, and that the number of gas molecules is equal to avogadro's number (6.022×10^23) times the number of moles of the gas. (a) what is the temperature of the gas after the energy is added? (b) what is the change in volume of the gas? (c) how much work is done by the gas during this process?

Answers: 3

Answer

Physics, 22.06.2019 19:40

It may seem strange that the selected velocity does not depend on either the mass or the charge of the particle. (for example, would the velocity of a neutral particle be selected by passage through this device? ) the explanation of this is that the mass and the charge control the resolution of the device--particles with the wrong velocity will be accelerated away from the straight line and will not pass through the exit slit. if the acceleration depends strongly on the velocity, then particles with just slightly wrong velocities will feel a substantial transverse acceleration and will not exit the selector. because the acc

Answers: 1

Answer

Physics, 22.06.2019 20:30

Avehicle accelerates from 0 to 30 m/s in 10 seconds on a straight road

Answers: 2

Answer

Physics, 22.06.2019 20:50

Asquare 1m x 1m plate is shown below. all four of its edges are kept at 0 co. at t=0the temperature distribution is given by: y xtsins n75)=.a) using separation of variables determine the temperature distribution t(x,y,t)along the plate at any time t.b) discretize the heat conduction equation +=22222 txtusing a second-order centered difference scheme for the two second derivatives and a first-order forward euler scheme for the first derivative. using von neumann stability analysis, determine the stability criterion for the proposed discretization scheme in terms of , hand t. solve for the maximum allowable time step tmax

Answers: 1

Answer

You know the right answer?

In an electric toaster, electricity passes through thin metal wires (called filaments) inside the to...

Questions