You are configuring a switch so that you can manage it via putty from the same network segment as the switch. on the switch, you enter the following commands: switch#config terminalswitch(config)#interface vlan 1switch(config-if) #ip address 192.168.1.10 255.255.255.0will this configuration work? a) no, the ip default gateway command needs to be setb)no, the no shutdown command needs to be enteredc)no, the switch needs to obtain ip address from the dhcp server using the ip address dhcp commandd)yes, the switch can now be access via putty by using the ip address 192.168.1.10