Computers and Technology, 15.07.2020 02:01 ajatez8813

Ray worked all morning trying to fix Lisa's broken computer. Ray discovered a problem with the RAM and replaced a bad module. He put the computer back together and tested the new RAM. He rebooted the computer into UEFI, and all the modules were read properly. Ray documented the problem and the solution in his tracking software and now is ready to head back to his work area. Who decides whether the work is completed and that Ray can return to his work area

Answers: 2

Show answers

Another question on Computers and Technology

Computers and Technology, 22.06.2019 18:30

All of the following are characteristics that must be contained in any knowledge representation scheme except

Answers: 3

Answer

Computers and Technology, 22.06.2019 23:00

Is an attack that relies on guessing the isns of tcp packets

Answers: 2

Answer

Computers and Technology, 23.06.2019 05:00

Jason works as an accountant in a department store. he needs to keep a daily record of all the invoices issued by the store. which file naming convention would him the most?

Answers: 2

Answer

Computers and Technology, 24.06.2019 07:30

Consider the folloeing website url: what does the "http: //" represent? a. protocal identifier. b. ftp. c. domain name d. resource name

Answers: 2

Answer

You know the right answer?

Ray worked all morning trying to fix Lisa's broken computer. Ray discovered a problem with the RAM a...

Questions

Engineering, 14.09.2019 01:20

Acomposite plane wall consists of 2 different layers a and b with conductivity of 0.1 w/mk and 0.05 w/mk and thickness of 2 cm and 4cm respectively. o...

Engineering, 14.09.2019 01:20

Acrew capsule has re-entered earths atmosphere and slowed to a speed of v=1134 m/s at an altitude where the static temperature is t=200 k and the stat...

Engineering, 14.09.2019 01:20

Aheat engine is coupled with a dynamometer. the length of the load arm is 900 mm. the spring balance reading is 16. applied weight is 500 n. rotationa...

Engineering, 14.09.2019 01:20

Find the diameter of the test cylinder in which 6660 n force is acting on it with a modulus of elasticity 110 x 103 pa. the initial length of the rod...

Engineering, 14.09.2019 01:20

Acrew capsule has re-entered earth’s atmosphere and slowed to a speed of v=1134 m/s at an altitude where the static temperature is t=200 k and the sta...

Engineering, 14.09.2019 01:20

Apump is put into service at the coast where the barometric pressure is 760 mm hg. the conditions of service are : flow rate 0,08 m3/s, suction lift...

Engineering, 14.09.2019 01:20

One kilogram of water fills a 0.140 m^3 rigid container at an initial pressure of 1.8 mpa. the container is then cooled to 40°c. determine the initial...

Engineering, 14.09.2019 01:20

Describe communication protocols and specify at least 3 of the modern protocols in use?...

Engineering, 14.09.2019 01:20

An internal gear pump delivers 45 litres of hydraulic fluid per minute at a pressure of 20 mpa when driven at 1430 r/min. calculate the input power to...

Engineering, 14.09.2019 01:20

What is the physical significance of the reynolds number? . how is defined for external flow over a plate of length l....

Engineering, 14.09.2019 01:20

Acentrifugal pump is required to deliver 33,6 m^3/s of water per minute against a head of 12 metres when driven at 750 r/min. the velocity of flow thr...

Engineering, 14.09.2019 01:20

H2 (hydrogen) is traveling through 120 ft of pipe, with 5 elbows. the psi at inlet is 10 psi higher than outlet. operating temperature at inlet is 150...

Engineering, 14.09.2019 01:20

Acylindrical specimen of some metal alloy having an elastic modulus of 123 gpa and an original cross-sectional diameter of 3.3 mm will experience only...

Physics, 14.09.2019 01:20

In the winter sport of bobsledding, athletes push their sled along a horizontal ice surface and then hop on the sled as it starts to careen down the s...

Engineering, 14.09.2019 01:20

An automobile tire with a volume of 0.8 m3 is inflated to a gage pressure of 200 kpa. calculate the mass of air in the tire if the temperature is 23 °...

Engineering, 14.09.2019 01:20

Calculate the size of a gas filled accumulator needed to supply a hydraulic system with 25 litres of fluid from a pressure of 20 mpa to a pressure of...

Physics, 14.09.2019 01:20

Acheetah can accelerate from rest to a speed of 21.5 m/s in 6.75 s. what is its acceleration? m/s^2...

Engineering, 14.09.2019 01:20

How to choose appropriate piston size for a piston accumulator?...

Physics, 14.09.2019 01:20

What is the magnitude of the electric field at a distance of 89 cm from a 27 μc charge, in units of n/c?...

Engineering, 14.09.2019 01:20

Afan was in use at a site where the usual atmospheric pressure and temperature were 101,3 kpa and 15°c, respectively. it was delivering 20 m3/s of air...

More questions: Computers and Technology Another questions