I WILL MARK BRAINLEST FOR THIS!!! Setting your choice in motion is part of what step in the decision-making process?

Choosing among alternatives
Gathering relevant information
Reviewing your decision
Taking action

Primary tech skills are skills that are necessary for success in online education

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

22. sata3 allows for data transfer rates of 600 mb/s. explain why you would likely not be able to copy data from one hard drive to another at anywhere close to this speed. also, what could be upgraded on the computer to achieve transfer speeds closer to 600 mb/s