Engineering, 26.07.2019 20:20 NNopeNNopeNNope
Apump is driven by electric motor with an efficiency of 0.87and with theoretical output of 22.2 gpm actually produces only 19.1 gpm. the pressure at the pump outlet is 2850 psi. if the pump has a mechanical efficiency of 0.97, what input horsepower is required to drive the pump? the electric motor is being operated for 15 hours a day and 235 day a year, how much electricity cost at $0.77 per kilowatt hour. how much operating cost is wasted yearly?
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
Engineering, 04.07.2019 18:20
Wiy doeres rere okhn a pump whon working betwon the same pressure range?
Answers: 2
Engineering, 04.07.2019 19:10
Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates
Answers: 3
You know the right answer?
Apump is driven by electric motor with an efficiency of 0.87and with theoretical output of 22.2 gpm...
Questions
Mathematics, 30.01.2021 03:10
Biology, 30.01.2021 03:10
Mathematics, 30.01.2021 03:10
Mathematics, 30.01.2021 03:10
Mathematics, 30.01.2021 03:10
Mathematics, 30.01.2021 03:10
Mathematics, 30.01.2021 03:10
Health, 30.01.2021 03:10
History, 30.01.2021 03:10
Mathematics, 30.01.2021 03:10
Mathematics, 30.01.2021 03:10
Mathematics, 30.01.2021 03:10
Mathematics, 30.01.2021 03:10
