Engineering, 07.08.2019 19:20 Multidewi3540
Aprocess cannot be totally reversible if it has: a. heat transfer through a temperature difference b. frictionless surfaces c. a single pure substance d. internal reversibility
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12ยฐ, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
Aprocess cannot be totally reversible if it has: a. heat transfer through a temperature difference...
Questions
English, 02.03.2020 22:55
Computers and Technology, 02.03.2020 22:55
Mathematics, 02.03.2020 22:55
Mathematics, 02.03.2020 22:55
Mathematics, 02.03.2020 22:55
Mathematics, 02.03.2020 22:55
History, 02.03.2020 22:55
Computers and Technology, 02.03.2020 22:55
