Engineering, 22.08.2019 02:20 Annabeans1105
Steam enters an adiabatic turbine with a pressure of 2 mpa and temperature of 250 c and leaves at 50 c. a) how much heat is transferred between the turbine and its environment? b) how much work is produced by this turbine if the process the steam experinces while passing through the turbine is internally reversible? c) what is the turbine outlet pressure if the isentropic efficiency of this turbine is 80%? d) how much work does the turbine produce if the turbine isentropic efficiency is 80%? explain the steps.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 08:10
Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed
Answers: 1
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
Steam enters an adiabatic turbine with a pressure of 2 mpa and temperature of 250 c and leaves at 50...
Questions
