subject
Engineering, 30.08.2019 05:30 hayleylatti8691

Apelton wheel nozzle, for which the coefficient of velocity is 0.95, is 330m below the water surface of a reservoir. the jet diameter is 100mm, the pipe diameter is 0.5m, it's length is 2km and f=0.01. the bucket deflects the jet through 160 degrees and they run at 0.46 times jet speed, bucket friction reducing the relative velocity at the outlet by 15% of the relative velocity at inlet. the mechanical efficiency of the turbine is 92%. find the flow rate and shaft power developed by the turbine.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
question
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
You know the right answer?
Apelton wheel nozzle, for which the coefficient of velocity is 0.95, is 330m below the water surface...
Questions
question
Mathematics, 14.01.2021 22:50
question
Mathematics, 14.01.2021 22:50
question
Mathematics, 14.01.2021 22:50
question
Mathematics, 14.01.2021 22:50
question
Mathematics, 14.01.2021 22:50
question
Mathematics, 14.01.2021 22:50
Questions on the website: 13722367