Engineering, 29.09.2019 02:30 janiadavis35
Agas - turbine power plant operates on the simple brayton cycle between the pressure limits of 100 and 1600 kpa. the working fluid is air, which enters the compressor at 40 c at a rate of 850 m^3/min and leaves the turbine at 650 c. assuming a compressor isentropic efficiency of 85 percent and a turbine isentropic efficiency of 88 precent, determine (a) the net power output, (b) the back work ratio, and (c) the thermal efficiency. use constant specific heats with cv =.821 kl/kg*k , cp = 1.108 kj/kh*k, and k= 1.35.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
Engineering, 05.07.2019 10:10
What is the correct way to measure the overall length of a boat? measure from the tip of the bow to the highest point on the gunwale. measure from the tip of the bow in a straight line to the stern of the boat. measure from the tip of the bow in a straight line to the back seat. measure from port to starboard at the boat's widest point.
Answers: 1
Engineering, 06.07.2019 02:30
On solidification from a melt, the polymer polyethylene forms a semi-crystalline spherulite structure. (i) sketch an individual spherulite and label the amorphous and crystalline regions. (ii) draw a schematic to show the changes in specific volume with temperature during cooling from the melt, comparing it to the theoretical extremes of fully crystalline and fully amorphous (indicate tm and tg)
Answers: 2
Engineering, 06.07.2019 02:30
1in2 processor chip can be modelled as an isothermal plane wall of silicon, isothermal on both sides. the power input to the bottom of the plane wall, or the processing power of the chip, often called the thermal design power (tdp), is 100w. assume the periphery is adiabatic. the silicon is 400 microns thick. the temperature at the junction, or in this case on the bottom of the isothermal plane wall, is 85°c. what is the top surface temperature, assuming that the only mode of heat transfer is conduction
Answers: 1
You know the right answer?
Agas - turbine power plant operates on the simple brayton cycle between the pressure limits of 100 a...
Questions
Biology, 15.10.2019 03:10
History, 15.10.2019 03:10
Mathematics, 15.10.2019 03:10
History, 15.10.2019 03:10
History, 15.10.2019 03:10
History, 15.10.2019 03:10
