Engineering, 05.10.2019 13:30 kutsarver
Acompressor operates at steady state with refrigerant 134a as the working fluid. the refrigerant enters at 0.24 mpa, 0°c, with a volumetric flow rate of 0.64 m/min. the diameters of the inlet and exit pipes are 3 and 1.5 cm, respectively. at the exit, the pressure is 1.0 mpa and the temperature is 50°c. if the magnitude of the heat transfer rate from the compressor to its surroundings is 5% of the compressor power input, determine the power input, in kw.
Answers: 2
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
Acompressor operates at steady state with refrigerant 134a as the working fluid. the refrigerant ent...
Mathematics, 06.12.2020 14:00
English, 06.12.2020 14:00
Business, 06.12.2020 14:00
Business, 06.12.2020 14:00
Mathematics, 06.12.2020 14:00
English, 06.12.2020 14:00
Mathematics, 06.12.2020 14:00
Computers and Technology, 06.12.2020 14:00
Mathematics, 06.12.2020 14:00
Mathematics, 06.12.2020 14:00
English, 06.12.2020 14:00