subject
Engineering, 23.10.2019 23:00 orlando19882000

The airbus a380 has a cruise mach number m = 0.85 with a lift to drag ratio l/d = 20. for simplicity, assume it cruises at a constant altitude of 35, 000 feet with a constant total weight of 450 metric tons (of course, in practice both of them change. the plane is going to get lighter because of fuel burn and will be scheduled to fly at a higher altitude before descending to the destination airport). it uses 4 turbo-fan engines.

(a) what is the thrust needed from each of the 4 engines at the cruise?

(b) as a very rough estimate, assume the average exhaust velocity of the jet from the engine is 400 m/s. estimate the total mass flow rate of the propellant (air breathed-in by the engines plus a small amount fuel).

(c) calculate the flight time from la to beijing. if the overall efficiency of the engines is 35%, estimate the total fuel that the plane has to carry onboard.

(d) now assume we use rockets with the same jet velocity, calculate the total rocket propellant (fuel and oxidizer) one would have to carry with the airplane if we were to use rocket engines with the same jet velocity. (note the thrust equation for rockets is different from that for the air-breathing engine). compare the propulsion efficiencies of the two options.

(e) we can reduce the amount of needed propellant for the rocket option by increasing the rocket exhaust velocity to 2000 m/s/. redo the calculations for the total amount of propellant needed and the resultant propulsion efficiency.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
question
Engineering, 04.07.2019 08:10
Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed
Answers: 1
question
Engineering, 04.07.2019 18:10
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
question
Engineering, 04.07.2019 18:20
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
You know the right answer?
The airbus a380 has a cruise mach number m = 0.85 with a lift to drag ratio l/d = 20. for simplicity...
Questions
question
Chemistry, 24.08.2019 04:20
question
Computers and Technology, 24.08.2019 04:20
question
Mathematics, 24.08.2019 04:20
Questions on the website: 13722361