Aspherical, underwater instrument pod used to make soundings and to measure conditions in the water has a diameter of 85 mm and dissipates 300 w. (a) estimate the surface temperature of the pod when suspended in a bay where the current is 1 m/s and the water temperature is 15c. (b) inadvertently, the pod is hauled out of the water and suspended in ambient air without deactivating the power. estimate the surface temperature of the pod if the air temp

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

An ideal rankine cycle with reheat uses water as the working fluid. the conditions at the inlet to the high pressure turbine are 10mpa, 650°c and the steam is reheated at a constant pressure of 1.4mpa before entering the low pressure turbine. for a condenser pressure of 10kpa, plot the cycle thermal efficiency and quality of steam at the low pressure turbine exit versus reheat temperatures (the temp of steam entering the low pressure turbine) of 400, 500, and 600°c. draw the t-s diagram and show all your work for a reheat temperature of 400°c .note, there will be two plots. one with thermal efficiency on in the ordinate versus reheat temperate and the other will have quality on the ordinate versus reheat temperature. be sure to label all axes with variables and units and include title. the plots must be done on computer.

Design a quick return four bar mechanism that will have time ratio of tr 1: 1.25 . the output link should scan 60° angle for a full crank rotation . the length of output link is 5.0 em 1)-find the length of the other links and draw the mechanism .(write down your steps) 2)-does the mechanism satisfy the grashof's condition. 3)-find the max and min transmission angles over the range of motion using graphical technique