Engineering, 02.11.2019 04:31 auviannadority13

Use matlab or another software program to calculate the following. a. let a=[.1.2.3.4; .4.3.2.1; .3.1.4.2; .2.4.1.3]. find a^1.b. let b=[.1.2.3.4; .4.3.2.1; .3.1.4.2; .2.4.1.29]. find b^1.c. let c=[.1.2.3.4; .4.3.2.1; .3.1.4.2; .2.4.1.31]. find c^1.d. comment on the differences between a, b and c. what is the sum of the entries in each row of a, b and c? what is the sum of the entries in each column of a, b and c? e. comment on the differences between a^1, b^1, and c^1. how large are the entries of each? draw analogies to 1^1 for a and .91 for b and 1.11 for c

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?

Answers: 3

Answer

You know the right answer?

Use matlab or another software program to calculate the following. a. let a=[.1.2.3.4; .4.3.2.1; .3....

Questions