Engineering, 20.11.2019 17:31 ae02705

Apower shovel with a dipper of 1.5 cubic yard capacity has a standard operating cycle time of 60 seconds. the excavated material which has a swell factor of 1.08 will be disposed by a dump truck with a 7.5 cubic yard capacity at a dumpsite 5 miles away. the average speed of a dump truck is 25 mph and the dumping time is 75 seconds. both the power shovel and the dump truck are operated 8 hours per day. a. find the daily standard production rate of the power shovel. b. find the daily standard production rate of the dump truck and number of trucks required. c. if the work conditions at the site that affect the productivity of the shovel can be represented by four factors f1 = 0.940, f2 = 0.952, f3 = 0.850 and f4 = 0.750, determine the job-site productivity and the actual cycle time. d. if the work conditions at the site affect the productivity of the dump truck can be represented by three factors f1 = 0.952, f2 = 0.700 and f3 = 0.750, determine the job site productivity of the dump truck, and the number of dump trucks required.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 12:10

On a average work day more than work place firs are reorted

Answers: 1

Answer

Engineering, 04.07.2019 18:10

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

Answer

You know the right answer?

Apower shovel with a dipper of 1.5 cubic yard capacity has a standard operating cycle time of 60 sec...

Questions