Engineering, 28.11.2019 02:31 frankcaroccio0203
Consider a thin, symmetric airfoil at a 6° angle of attack flying at a dynamic pressure of if qw = 6 kpa and with a chord length of 1.5 meters. d) consider replacing this airfoil with a cylinder of diameter 1.5 meters. assuming the flow is inviscid, irrotational and steady, how fast must the cylinder rotate in order to generate the same lift? hint: recall the relationship between the vortex velocity at r = r and the rotation speed.
Answers: 2
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
Consider a thin, symmetric airfoil at a 6° angle of attack flying at a dynamic pressure of if qw = 6...
Mathematics, 07.06.2020 06:58
Biology, 07.06.2020 06:58
Mathematics, 07.06.2020 06:58
Mathematics, 07.06.2020 06:58
Physics, 07.06.2020 06:58
Mathematics, 07.06.2020 06:58
History, 07.06.2020 06:58
Mathematics, 07.06.2020 06:58