Engineering, 04.12.2019 02:31 natalie2sheffield
The discharge at b=0.02 cubic meter per second. assume the pipe diameter is 100mm, length is 38m, and friction factor is 0.026. find the power generated by the turbine including all losses. draw the el and hgl.
Answers: 3
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
The discharge at b=0.02 cubic meter per second. assume the pipe diameter is 100mm, length is 38m, an...
Mathematics, 17.01.2020 00:31
Social Studies, 17.01.2020 00:31
Social Studies, 17.01.2020 00:31
Advanced Placement (AP), 17.01.2020 00:31
Mathematics, 17.01.2020 00:31
Mathematics, 17.01.2020 00:31