Engineering, 12.12.2019 22:31 jordanjones022

G(s) = k(s + 6) /(s + 2)(s + 3)(s + 5) the system is operating with a dominant pole damping ratio of 0.707. design a pd con- troller so that the settling time is reduced by a factor of 2. in the process of doing the design, prepare two hand sketches of the root locus - the first for the uncompensated system and the second for the system with the pd controller. in drawing these hand sketches, show the asymptotes and centroid of the root locus. (for numerical details of break-away/break-in points, j! -axis crossings and other intersection points, use matlab).

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

Answer

Engineering, 04.07.2019 19:20

The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.

Answers: 3

Answer

You know the right answer?

G(s) = k(s + 6) /(s + 2)(s + 3)(s + 5) the system is operating with a dominant pole damping ratio of...

Questions