subject
Engineering, 18.12.2019 02:31 layla8993

A33.8-lb aluminum bar, initially at 200 degree f, is placed in a tank together with 249 lb of liquid water, initially at 70 degree f, and allowed to achieve thermal equilibrium. the aluminum bar and water can be modeled as incompressible with specific heats 0.216 btu/lb*degree rankine and 0.998 btu/lb*degree rankine, respectively. for the aluminum bar and water as the system, determine:
(a) the final temperature, in degree f
(b) the amount of entropy produced within the tank, in btu/degree rankine.
note: ignore heat transfer between system and its surroundings

( (a) 533.7 r, (b) 0.1789 btu/r )

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
question
Engineering, 04.07.2019 18:20
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
You know the right answer?
A33.8-lb aluminum bar, initially at 200 degree f, is placed in a tank together with 249 lb of liquid...
Questions
Questions on the website: 13722362