Engineering, 19.12.2019 00:31 smartypants02
Acylindrical bucket of dia d = 1 m, height h = 5 m is initially empty. it is being filled with water flow from the top at a rate of q = 1 m3/s. the bottom of the bucket has many small openings. the flow through each opening is q = 0.01 m3/s. the openings are activated at a constant rate of n = 10 per sec by turning a lever. initially all the openings are shut. the lever to open the holes is activated at t = 1 sec after the inlet flow of water has been started.
(a) what is the maximum height of water in the bucket and at what time does it occur? b) will water in the bucket ever rise to a level of 1 m?
Answers: 2
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Acylindrical bucket of dia d = 1 m, height h = 5 m is initially empty. it is being filled with water...
History, 10.07.2019 17:00
Chemistry, 10.07.2019 17:00
Social Studies, 10.07.2019 17:00
Biology, 10.07.2019 17:00
Social Studies, 10.07.2019 17:00
Social Studies, 10.07.2019 17:00
English, 10.07.2019 17:00