In air standard brayton cycle the air enters the compressor at 100 kpa, 300 k. the pressure at the end

compression process is 500 kpa and the maximum temperature in the cycle is limited to 1200 k. calculate (a)

the pressure and temperature at each point in the cycle, (b) the compressor work, the turbine work and cycle

efficiency. assume specific heats to be constant.

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way