Engineering, 22.02.2020 01:18 coryintheswamp
Write a iterative function that finds the n-th integer of the Fibonacci sequence. Then build a minimal program (main function) to test it. That is, write the fib() solution as a separate function and call it in your main() function to test it. For reference see Fibonacci number. INPUT OUTPUT (0, 2) (1, 3) (2, 5) 5 INPUT: OUTPUT: (0, 2) (1, 3) (2, 5) (3, 8) (4, 13) 13 INPUT: OUTPUT: (0, 2) 6765 (1, 3) (2, 5) (3, 8) (4, 13) (5, 21) (6, 34) (7, 55) (8, 89) (9, 144) (10, 233) Note, the first number in the pair is the iteration count (i) and the second number is the value of the (i+2)-th Fibonacci value. Problem 2 Write a recursive function that finds the n-th integer of the Fibonacci sequence. Then build a minimal program to test it. For reference see Fibonacci number. To check for recursion, please have the Fibonacci function print out its input as shown in the examples below: INPUT: OUTPUT: fib(5) fib(4) fib(3) fib(2) fib(1) fib(0) fib(1) fib(2) fib(1) fib(0) fib(3) fib(2) fib(1) INPUT: OUTPUT: fib(7) fib(6) fib(5) fib(4) fib(3) fib(2) fib(1) fib(0) fib(1) fib(2) fib(1) fib(0) fib(3) 13 Problem 3 In this problem, you need to print the pattern of the following form containing the numbers from 1 to n: 4 4 4 4 4 4 4 4 3 3 3 3 3 4 4 3 2 2 2 3 4 4 3 2 1 2 3 4 4 3 2 2 2 3 4 4 3 3 3 3 3 4 4 4 4 4 4 4 4 Example when n=4. INPUT Input contains a single integer n. CONSTRAINTS • 1 <= n <= 1000 OUTPUT Print the pattern mentioned in the problem statement. EXAMPLES: INPUT: INPUT: OUTPUT: 2 2 2 2 1 2 2 2 2 INPUT: 5 OUTPUT: 5 5 5 5 5 5 5 5 5 5 4 4 4 4 4 4 4 5 5 4 3 3 3 3 3 4 5 5 4 3 2 2 2 3 4 5 5 4 3 2 1 2 3 4 5 5 4 3 2 2 2 3 4 5 5 4 3 3 3 3 3 4 5 5 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 INPUT: 7 INPUT: 7 OUTPUT: 7 7 7 7 7 7 7 7 7 7 7 7 7 7 6 6 6 6 6 6 6 6 6 6 6 7 7 6 5 5 5 5 5 5 5 5 5 6 7 7 6 5 4 4 4 4 4 4 4 5 6 7 7 6 5 4 3 3 3 3 3 4 5 6 7 7 6 5 4 3 2 2 2 3 4 5 6 7 7 6 5 4 3 2 1 2 3 4 5 6 7 7 6 5 4 3 2 2 2 3 4 5 6 7 7 6 5 4 3 3 3 3 3 4 5 6 7 7 6 5 4 4 4 4 4 4 4 5 6 7 7 6 5 5 5 5 5 5 5 5 5 6 7 7 6 6 6 6 6 6 6 6 6 6 6 7 7 7 7 7 7 7 7 7 7 7 7 7 7
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
You know the right answer?
Write a iterative function that finds the n-th integer of the Fibonacci sequence. Then build a minim...
Questions
Mathematics, 06.01.2021 23:30
Mathematics, 06.01.2021 23:30
Mathematics, 06.01.2021 23:30
Mathematics, 06.01.2021 23:30
Mathematics, 06.01.2021 23:30
English, 06.01.2021 23:30
English, 06.01.2021 23:30
Health, 06.01.2021 23:30
Social Studies, 06.01.2021 23:30
Mathematics, 06.01.2021 23:30
Mathematics, 06.01.2021 23:30
Mathematics, 06.01.2021 23:30
