Propane undergoes an incomplete combustion reaction. We are told that 200 mol/min of propane is fed to a combustion chamber, and the fractional conversion of propane is 0.3. What quantities and values would be needed to calculate the theoretical amount of oxygen? Select all that apply

a. The amount of propane fed to the reactor (200 mol/min)
b. The fractional conversion of propane (0.3)
c. The stoichiometric coefficients of propane and oxygen in the incomplete combustion reaction
d. The stoichiometric coefficients of propane and oxygen in the complete combustion reaction

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.

The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false