Engineering, 27.02.2020 23:54 thatcommondumbgirl
A rectangular workpiece has the following original dimensions: 2a=100mm, h=25mm, and width=20mm. The metal has a strengh coefficient of 400MPa and strain-hardening exponent of 0.5. It is being forged in plane strain with mu=0.2. Calculate the force required when the height is reduced by 20 percent. Do not use average pressure formulas.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
You know the right answer?
A rectangular workpiece has the following original dimensions: 2a=100mm, h=25mm, and width=20mm. The...
Questions
Mathematics, 01.11.2019 02:31
English, 01.11.2019 02:31
Mathematics, 01.11.2019 02:31
Mathematics, 01.11.2019 02:31
English, 01.11.2019 02:31
Biology, 01.11.2019 02:31
English, 01.11.2019 02:31
